Standard 6´ container, new, from stock

9500 DKK excl. VAT

6′ container which can be used for dry storage.
Container is normally in blue (RAL 5010).
Containers in other colors are also available – either at same price or for an added cost. Ask us about colors and we will check up on it.
On one of the photos, there is an example of how the container can be fitted with insulation and shelving. Please note that this is not included in the price, but it is something that can be arranged at an additional cost, and it should provide a good insight into how the container can be fitted.
Price is for all based on delivery EXW stock in Aarhus (Denmark).
Transport costs will be added for delivery.

Sling McKinnon thumbnail Out Of Stock

10′ offshore chain sling, WLL 11.500 kg – 5 days delivery time

9850 DKK excl. VAT

DNV-GL type approved 4-part chain sling with forerunner for a 10′ offshore container.
Completely new from end of 2018.

Ready for use in Denmark, Norway, and elsewhere.

Angle is 30 degree from vertical. Length leg is 4000 mm each. Chain diameter is 16 mm. Material grade 80.

Fitted with Gunnnebo Anja 8.5 T shackles.

Sling is available from remote stock location.
Price is based on delivery EXW stock in Esbjerg (Denmark).
Transport costs will be added for delivery.

40 HC container

Insulated 40´ HC container, new

57000 DKK excl. VAT

40′ container can be used for storage.

The container is CSC approved, meaning it’s approved for transport by sea.

By default, it comes in blue color (RAL 5010), and dark blue color (RAL 5013).

Other colors are also available – either at the same price or at an additional cost. Ask us and we will check.

The container has been on a trip home with goods from the East, and therefore there may be scratches outside.

We need up to 14 days to make the container ready with insulation.

Price is based on delivery EXW stock in Aarhus (Denmark).
Transport costs will be added for delivery.

Locking device, and other extra equipment is not included, but can be purchased from us as well.

The price is as always excluding VAT.

8’ offshore container

8’ offshore container, w/shelf

35000 DKK excl. VAT

These 8′ containers might have been produced some years back, but has just been sitting in a depot since then.

Hidden, but protected from wind, weather, and the harsh use offshore, they look as if it would have been produced just recently. The photos on the left are from June 2018!

The containers are naturally certified DNV 2.7-1 for offshore use and produced according to Norsok regulations in 2013.

Included in the price is as always a complete DNV 2.7-1 visual inspection and NDT of padeyes, in order for the containers to be able to go offshore immediately afterwards.

Price is based on EXW depot in Esbjerg (Denmark).
Transport costs will be added for delivery.
Price is excluding sling.

14′ offshore chain sling, WLL 15.000 kg (150212) (1pc)

11000 DKK excl. VAT

4-part chain sling with forerunner for a 14′ HC offshore container.
Completely new, never been used.

Fitted with Gunnebo ANJA no. 856 9.5 T shackles.

Price is based on delivery EXW stock in Esbjerg (Denmark).
Transport costs will be added for delivery.

150212-2

20′ offshore used, DNV certified

49000 DKK excl. VAT

Certified DNV 2.7-1 for offshore use. Solidly build and with original certificate from DNV-GL.
Has been used as warehouse for a few years. Interior is worn with some rust. Exterior structure and paint is in really good condition.
Container is sold in the current condition as it stands, meaning it is including contents and fixtures inside.

Price is based on delivery EXW stock in Esbjerg (Denmark).
Transport costs will be added for delivery.
Price is excluding sling.

20′ offshore chain sling, WLL 24.000 kg, (141104) (1pc) (ON RENTAL)

14000 DKK excl. VAT

ON RENTAL UNTIL END OF AUGUST (EXPECTED)

4-part chain sling without forerunner for 24.000 kg.
Fitted with Gunnebo ANJA no. 856 12 T shackles.
Slightly used for a few months, but still as good as new. Was tested and repainted to yellow in August 2018.
Price is based on delivery EXW stock in Ribe (Denmark).
Transport costs will be added for delivery.
141104-1

10? MED 2 INDGANGE_thumbnail

10′ offshore, light blue, doors both ends

54900 DKK excl. VAT

Certified DNV 2.7-1 for offshore use. Access from 2 door-openings for easy operation and more people can work on the container at the same time. Designed for arctic temperatures (down to -40 degrees (C)).

Full visual and non-destrutive padeye tests according to DNV 2.7-1 have been carried out in October 2019, and container was fully approved.

Price is based on delivery EXW stock in Esbjerg (Denmark).
Transport costs will be added for delivery.
Price is excluding sling.

8′ offshore container, SPEC12115

35000 DKK excl. VAT

Certified DNV 2.7-1 for offshore use.

Designed for arctic temperatures (down to -40 degrees (C)).

A reasonable alternative if 10′ is too big a container.

Price is based on delivery EXW stock in Esbjerg (Denmark).
Transport costs will be added for delivery.
Price is excluding sling.

AbsorBag™_front

Absortech Bag

84 DKK excl. VAT

High absorption with water collector

AbsorBag® is based on the proven ability of calcium chloride to aggressively remove moisture from the air.

The AbsorBag® is easy to use and designed to occupy minimal container space with full functionality. AbsorBag®’s high performance and long lasting absorption rate offers efficient protection for long shipments.

AbsorBag® is also available with a protective outer cardboard cover for added protection against shifting cargo.

Typical applications

The AbsorBag® can be used for any type of cargo that allows at least 10 cm space between the cargo and the AbsorBag® and for cargo not loaded higher than 1.5 meters from the floor.

Working temperature: –20° C to +80° C

Absorbing medium: Calcium chloride

(CAS registry number 10043-52-4)

Absorption capacity: Up to 2.25 liters

Certificate

Certificate for twistlock standard

250 DKK excl. VAT

Inspection and material certifcate from 3rd party classification society.

Delivered electronically after purchase together with container standard twistlocks.

Certificate

Certificate for twist lock, transversal

250 DKK excl. VAT

Inspection and material certifcate from 3rd party classification society.

Delivered electronically after purchase together with container twistlock, transversal.

V-MAG-340-on-wall-with-handle_burned_200x150

V-Tool for 340 KG magnets – V-MAG series

398 DKK excl. VAT

Used to install and remove the V-MAG neodyme 340 KG magnets with thread size Ø 8 mm.

For safety purposes, V-MAG tool is always needed and it helps you safely handle the neodyme magnets in an effective way.

8´ standard container, new, from stock

11000 DKK excl. VAT

8′ container which can be used for dry storage.

Container is normally avaible in blue and black.

Containers in other colors are also available – either at same price or for an added cost. Ask us about colors and we will check up on it.

The container has been shipped once as goods from factory in Asia, and there can be scratches inside and outside from the transport..

Price is for all based on delivery EXW stock in Aarhus (Denmark). For some in blue, they are also available on depot in Copenhagen.
Transport costs will be added for delivery.

Containers legs – can hold up to 30 ton

19499 DKK excl. VAT

With ConFoot shipping container legs, your container can be unloaded from or onto a trailer by just one person….. and without any use of crane or other unloading equipment.

its user-friendy, cost effective and safe.

How it works
The container is raised by the air suspension chassis on a truck. At this point the ConFoot legs are fitted to the shipping container’s corner casting. When the chassis is then lowered, the legs will come into contact with the ground, shifting the weight of the container onto the legs. The truck can then drive away with it’s chassis and the container will be left standing free on the legs. The same process in reverse is used to load a container back onto the chassis. Check out the video on the right.

What type of chassis will this work on?
For ConFoot legs to function, they must be used in tandem with a truck chassis with functioning air suspension. The chassis must also be able to lower to the point where the corner casting of the loaded shipping container is between 1043 – 1448 mm above the ground. The vast majority of air suspension chassis can do this, but there are a few exceptions.

ConFoot sets have been tested with up to a maximum wind speed of 20 m/s, or 72 km/h.

The design of the ConFoot legs structure complies with the safety regulations decribed in the European 2006/42/EC Mavhinery Directive

Designed and tested in Finland.

40 HC container

40´ HC standard container, new

27500 DKK excl. VAT

40′ container can be used for storage.

The container is CSC approved, meaning it’s approved for transport by sea.

By default, it comes in blue color (RAL 5010), and dark blue color (RAL 5013).

Other colors are also available – either at the same price or at an additional cost. Ask us and we will check.

The container has been on a trip home with goods from the East, and therefore there may be scratches inside and outside.

Price is based on delivery EXW stock in Aarhus (Denmark).
Transport costs will be added for delivery.

Locking device, and other extra equipment is not included, but can be purchased from us as well.

The price is as always excluding VAT.

Mavako 3650 for reefer containers

3150 DKK excl. VAT

Mavako 3650 aflåsningssystemet er beregnet til tykkere døre som der f.eks. ses i kølecontainere eller container-moduler

Som standard kommer denne lås med lidt længere bolte, da den skal boltes fast igennem rammen på containeren. På køle containere skal den monteres med gevindstang og evt. nogle underlagsplader for at stive af og udligne eventuelle skævheder.

Beslaget er godkendt i højeste sikkerhedsklasse, klasse 5, efter normen SSF1051, som er det der kræves fra forsikringsselskaberne. Certifikat på godkendelsen kan ses her.

Låsen leveres med monteringsvejledning samt papirsskabelon.

Et sæt består af et langt beslag, gevindstang, underlagsplader, lås, cylinder, nøgler, sikkerhedskort.

Mavako 3650 leveres fra lager i løbet af 2-3 dage.

Prisen er baseret på levering EXW lager i Horsens (Danmark).
Transportomkostninger vil blive tilføjet til levering.

AbsorGel®Compact-C_front

Absorgel Compact

95 DKK excl. VAT

For bulk loaded or tightly packed containers

AbsorGel Compact are based on the proven ability of calcium chloride to aggressively remove moisture from the air. The absorbed water is bound into a gel so no liquid water is formed, which prevents leakage. AbsorGel Compact are easy to use. They are designed to hang from the lashing rings below the container ceiling. Both products are easy to install and remove, due to the patented Absor-Hook System.

Typical applications

AbsorGel Compact can be used for all types of cargo. They are especially suitable when the cargo is tightly packed close to the container ceiling and walls. Use AbsorGel Compact depending on how high you load your cargo.

Absor-Hook – Unique hanging device

With the patented Absor-Hook System it is easy and quick to hook the AbsorGelCompact on and off the container lashing rings. No ladder is needed and you will save time, effort and money.

“Bild”

Working temperature: -20° C to + 80° C

Absorbing medium: Calcium chloride

(CAS Registry Number 10043-52-4)

Absorption capacity: Up to 4.5 liters

Corner casting, aluminium, top right

Corner casting, aluminium, top right

2263 DKK excl. VAT

Corner castings are items that you find on almost all ISO CSC type containers used for shipping and often also on offshore DNV 2.7-1 containers.

This aluminium type corner casting is a special type, where a normal casting has been adapted as much as the aluminium material allows.

One complete set for 1 container, consists of 4 x 2 pcs., totally 8 pcs.
2 pcs. Top right (TR), 2 pcs. Top left (TL), 2 pcs. Bottom right (BR), 2 pcs. Bottom left (BL).

Inside each corner casting, there is a stamp with either TR, TL, BR or BL to recognize which specific corner casting it is.

Aluminium corner castings are supplied with a quality test certificate and mill test certificate, stating the material alloy and the hardness.

This item is available on external supplier’s stock. The delivery time is 7-14 days.

 

Mavako 3800I

3500 DKK excl. VAT

Mavako 3800I aflåsningssystemet sikrer dig optimal beskyttelse af dit gods mod indbrud. Det er et nyt patenteret produkt på markedet, og systemet er testet og godkendt i henhold til SSF 1051 til klasse 5 (Danmark). Certifikat på godkendelsen kan ses her.

Det indvendige låsebeslag på Mavako 3800I er nemt og hurtigt at montere – og med hurtigt menes i løbet af 15-20 minutter! Beslaget giver en effektiv låsemekanisme til containere, og sikrer, at containerens gods er optimalt beskyttet. Monteringsvejledning kan ses her.

Systemet er til sikring af container hvor aflåsningssystemet skal være permanent på containeren. Udefra er det eneste synlige blot en nøgle cylinder.

Fordele:

– Testet efter SSF 1051 til forsikringsklasse 5
– Umulig at komme til da alt undtagen cylinder er gemt væk
– Effektiv låsemekanisme

Et sæt består af beslag. lås. cylinder, nøgler, sikkerhedskort.

Mavako 3800I leveres fra lager i løbet af 2-3 dage.

Prisen er baseret på levering EXW lager i Horsens (Danmark).
Transportomkostninger vil blive tilføjet til levering.

20′ offshore chain sling, WLL 16.500 kg, (141105) (1pc)

10000 DKK excl. VAT

4-part chain sling without forerunner for 16.500 kg.
Fitted with Gunnebo ANJA no. 856 12 T shackles.
Slightly used for a few months, but still as good as new.
Sling will be delivered with new 4 year inspection and painting to this year’s color or color as per request.
Price is based on delivery EXW stock in Esbjerg (Denmark).
Transport costs will be added for delivery.
141105-1

Bridge fitting

Bridge fitting

345 DKK excl. VAT

Bridge fittings are primarily designed to fix 2 containers together – either from the side or from the top.

Bridge fittings on this item no. are one of several types and this is the standard type with BL = 100 KN.

If needed, a test and material certificate is available and can be purchased seperately.

Price is based on delivery EXW stock in Aarhus (Denmark).

Example of data plate

Dataplate, custom made, for container

750 DKK excl. VAT

Standard size container dataplate custom made as per request.
Upon ordering, we will contact you for the details to be put in the plate.
Estimated delivery time is 2-3 weeks.

6′ offshore chain sling, WLL 6.620 kg

3900 DKK excl. VAT

4-part chain sling with forerunner for a 6′ offshore container.
Slightly used, but only for a few months.

4 year inspection and testing has been carried out by Certex in May 2018.

Price is excluding shackles.

Price is based on delivery EXW stock in Esbjerg (Denmark).
Transport costs will be added for delivery.

v-mag 70

70 kg magnet – V-MAG – For the extreme

375 DKK excl. VAT

Light duty magnet as alternative where welding is difficult, expensive, or time consuming.
This magnet…
…Reduces installation time
…Reduces installation cost
…Works in extreme environments

Holds your item… also in 25 years
We like to call V-MAG a semi permanent, non-destructive, non-intrusive mounting method.
You will find that the magnets are easy to mount and dismount and without any risk of damage to the surface. Still, the proof force loss is within 2% over 25 years of liftime. So it barely loses any magnetism during it’s lifetime.

Keep cameras, ladders, brackets, fixed
Need an item placed easily and quickly. With an Ø6 thread, you can easily install items like light fixtures, fire extinguishers, wireless or security cameras, ladders for climbing, and all kinds of other brackets. Quickly place whatever you need inside your container.
For heavier items, we have the 340 kg magnet as well.

Works in extreme conditions and on any surface
No need for welding or surface preparation. The magnet attaches easily to existing structures.
It is especially suitable for structures placed in extreme areas, like wind turbines, oil rigs, and vessels.
Even in these conditions, the magnet is still on par with welding, but much faster to apply in such extreme environments.

Trust a proven product
More than 2 million V-MAG’s are in use today. It has more than 12 years track record.
Magnets are used in offshore oil, gas, and wind, and maritime industries as well as to some extent defence and telecom.

Use the V-MAG to solve what would have been an expensive, difficult, and time consuming welding task.

We supply products from:

supplier logo - van beest
supplier logo -CIMC
supplier logo - jdt