You already have mounting points in the corner castings with Domino Clamp.

But what happens when the construction continues across the full length of the container?

That is where many projects run into a practical problem:

👉 A stable mounting point is missing in the middle of the container’s top side rail.

In practice, this often leads to:

• Temporary solutions that are not fully stable
• Constructions that start bending in the middle
• Difficult installation work
• Or drilling and welding directly on the container

This becomes especially challenging on longer setups on a 20 foot container or 40 foot container, where materials such as timber, pipes or Unistrut channels need support across the full length.

Roof Bracket for Containers

The Roof Bracket for Containers is developed as an addition to the Domino Clamp system.

The bracket mounts directly onto the container’s upper side rail and creates an extra mounting point between the container corners – without permanent modifications to the container.

This creates a more stable solution when installations or constructions need to continue across or above the container.

The bracket is manufactured in stainless steel and designed to work together with Domino Clamp.

Why does it become necessary?

Many projects start with Domino Clamp mounted in the corner castings.

This works well for securing equipment at the ends of the container.

But when the setup becomes larger, another issue often appears:

The middle section lacks support.

This can be relevant for:

• Cable routing
• Lights and sensors
• Banner constructions
• Solar panels
• Temporary installations
• Pipes and technical systems
• Multi-level constructions

Without support in the middle, longer materials may begin to flex or bend – especially on longer containers.

Designed for practical installation

The roof bracket includes five M12 threaded holes, making it possible to fasten different types of equipment directly onto the top edge of the container.

It can be used together with:

• Timber beams
• Unistrut channels
• 48 mm scaffolding pipes
• NPS pipes
• Temporary constructions

The bracket is mechanically mounted using bolts and washers.

That means you avoid:

🚫 Welding
🚫 Drilling
🚫 Permanent modifications to the container

It also means the solution can later be removed and reused on other containers.

A more flexible way to build on containers

Many container projects change over time.

Installations need to be moved.
Additional equipment is added.
New functions are integrated.

That is why many companies choose solutions where the container can still remain flexible afterwards.

The combination of Domino Clamp and Roof Bracket creates a more modular approach to container mounting.

You get:

• More mounting points
• Better support across longer spans
• The ability to continue building without permanently changing the container structure

Typical industries using the solution

The solution is especially relevant within:

• Construction sites
• Offshore and maritime projects
• Temporary installations
• Modular building projects
• Industrial and technical installations
• Wind & Energy projects

These industries often require fast installation, flexibility and solutions that can be modified later.

Q&A

What is the Roof Bracket for Containers used for?
The Roof Bracket for Containers is used to create an additional mounting point on the container’s upper side rail. It makes it easier to install cable routing, lights, sensors, pipes and temporary constructions without drilling or welding into the container.

Does the Roof Bracket work together with Domino Clamp?
Yes. The bracket is designed as an addition to the Domino Clamp system and is used together with Domino Clamp to create additional mounting points along the container top.

Does the container need to be drilled or welded?
No. The Roof Bracket is mechanically mounted without permanent modifications to the container. This means the solution can later be removed and reused on other containers if needed.