Showing all 25 results

v-mag-340

340 kg magnet – V-MAG – For the extreme

475 DKK Excl. VAT

Heavy duty magnet as alternative where welding is difficult, expensive, or time consuming.
This magnet…
…Reduces installation time
…Reduces installation cost
…Works in extreme environments

Holds your item… also in 25 years
We like to call V-MAG a semi permanent, non-destructive, non-intrusive mounting method.
You will find that the magnets are easy to mount and dismount and without any risk of damage to the surface. Still, the proof force loss is within 2% over 25 years of liftime. So it barely loses any magnetism during it’s lifetime.

Keep cameras, ladders, brackets, fixed
Need an item placed easily and quickly. With an Ø8 thread, you can easily install items like light fixtures, fire extinguishers, wireless or security cameras, ladders for climbing, and all kinds of other brackets. Quickly place whatever you need inside your container.
For lighter items, we have the 70 kg magnet as well.

Works in extreme conditions and on any surface
No need for welding or surface preparation. The magnet attaches easily to existing structures.
It is especially suitable for structures placed in extreme areas, like wind turbines, oil rigs, and vessels.
Even in these conditions, the magnet is still on par with welding, but much faster to apply in such extreme environments.

Trust a proven product
More than 2 million V-MAG’s are in use today. It has more than 12 years track record.
Magnets are used in offshore oil, gas, and wind, and maritime industries as well as to some extent defence and telecom.

Use the V-MAG to solve what would have been an expensive, difficult, and time consuming welding task.

Pencil case container

Pencil case, container

119 DKK Excl. VAT

Away with the mess on your desk! This container style pencil box is the true and trendy way to store your pens, rulers and so on.

V-Tool for magnets – V-MAG series

V-Tool for 70 KG magnets – V-MAG series

298 DKK Excl. VAT

Used to install and remove the V-MAG neodyme 70 KG magnets with thread size Ø 6 mm.

For safety purposes, V-MAG tool is always needed and it helps you safely handle the neodyme magnets in an effective way.

Bin container

Bin, container

149 DKK Excl. VAT

Load your garbage directly into the container. This bin in the look of the global shipping container is almost too formal and colorful to hide under a desk.
Thanks to the original plug-in system and high-resolution digital printing, even a paper bin made of sturdy MDF can be a trendy home or office accessory.

Key-box container

Key box, container

249 DKK Excl. VAT

This container contains the most valuable cargo.
The key box is made entirely of resource-conserving wood-based panels (MDF), including the hinged doors and the 10 hooks.
The motif is created by laminated, high-resolution digital printing on paper from sustainable forestry, protected with an UV-resistant surface.

Sale!
Toilet paper holder container

Toilet paper holder, container

119 DKK 85 DKK Excl. VAT

With this container, you can store a lot of paper.
The original toilet paper holder makes every boring roll of toilet paper a highlight in the quiet little place!
Suitable for wall mounting.

Universal box container

Universal box, container

189 DKK Excl. VAT

Send your mess on a journey around the world: With the universal box in a trendy container design, you can put everything in the right place at home, in the nursery or in the office.
The box consists of dimensionally stable MDF boards, which are very easy to assemble without screws and gluing, while still being extremely durable. The container motive is created by laminated high-resolution digital printing on paper coming from sustainable forestry, protected by an UV-resistant surface.

Folder container

Folder, container

79 DKK Excl. VAT

Become a globetrotter! With this container folder you give your documents the special industrial charm.
The folder is made of sturdy MDF and has laminated digital print on paper from sustainable forestry.
The surface is protected by UV varnish, in order to keep the surface from taking damage from sun light.
A strong document clamp makes it a versatile helper.
The closing rubber holds the contents together to protect against overly curious eyes.

v-mag 70

70 kg magnet – V-MAG – For the extreme

375 DKK Excl. VAT

Light duty magnet as alternative where welding is difficult, expensive, or time consuming.
This magnet…
…Reduces installation time
…Reduces installation cost
…Works in extreme environments

Holds your item… also in 25 years
We like to call V-MAG a semi permanent, non-destructive, non-intrusive mounting method.
You will find that the magnets are easy to mount and dismount and without any risk of damage to the surface. Still, the proof force loss is within 2% over 25 years of liftime. So it barely loses any magnetism during it’s lifetime.

Keep cameras, ladders, brackets, fixed
Need an item placed easily and quickly. With an Ø6 thread, you can easily install items like light fixtures, fire extinguishers, wireless or security cameras, ladders for climbing, and all kinds of other brackets. Quickly place whatever you need inside your container.
For heavier items, we have the 340 kg magnet as well.

Works in extreme conditions and on any surface
No need for welding or surface preparation. The magnet attaches easily to existing structures.
It is especially suitable for structures placed in extreme areas, like wind turbines, oil rigs, and vessels.
Even in these conditions, the magnet is still on par with welding, but much faster to apply in such extreme environments.

Trust a proven product
More than 2 million V-MAG’s are in use today. It has more than 12 years track record.
Magnets are used in offshore oil, gas, and wind, and maritime industries as well as to some extent defence and telecom.

Use the V-MAG to solve what would have been an expensive, difficult, and time consuming welding task.

V-MAG-340-on-wall-with-handle_burned_200x150

V-Tool for 340 KG magnets – V-MAG series

398 DKK Excl. VAT

Used to install and remove the V-MAG neodyme 340 KG magnets with thread size Ø 8 mm.

For safety purposes, V-MAG tool is always needed and it helps you safely handle the neodyme magnets in an effective way.

WE_2053_Radlader_1 200x150

Wheel loader penholder

149 DKK Excl. VAT

Away with the mess on your desk! This wheel loader penholder is the trendy way to store your pens, rulers and so on. This wheel loader, is responsible for more than lifting – it also carries paper clips, stickers and business cards in the extra bucket space. The two 8.5 cm deep and the other four 6 cm deep compartments provide enough space to keep the desk clean. The smartphone can also be placed conveniently on the lifting frame and can always be seen.

bauwagen-stiftebox-werkhaus-we2059 200x150

Construction trailer penholder

119 DKK Excl. VAT

Get rid of clutter on your desk! This construction trailer is a really trendy way to store and store your pens, rulers, etc. The construction trailer is a spacious equipment store and the ideal addition to the entire vehicle group on the construction site. With its 6 rooms in the same size, it offers enough storage space for tools and consumables of all kinds! Get the rustic construction trailer organized on your desk!

2058_Gabelstapler 200x150

Forklift penholder

119 DKK Excl. VAT

Away with the mess on your desk! This forklift prnholder is the trendy way to store your pens, rulers and so on. On this forklift penholder there is also space on the two forks for banknotes, post-it pads and a mobile phoneholder on the mast.

kettenbagger-stiftebox-organizer-werkhaus 200x150

Excavator pen holder

119 DKK Excl. VAT

This excavator penholder is the ideal gift for women and men whose desks look like extraordinary construction sites. It helps to get the daily chaos under control and stimulates creativity.

The bucket arm is movable at three points and actually swings its bucket upwards. The MDF excavator has a total of five compartments for writing implements.

The compartment in the cab has a depth of 8 cm and is in relation to the other three compartments with a depth of 5.5 cm suitable for scissors, brushes and thicknesses.

The back compartment is suitable for small notepads or staples and also office supplies. The shovel excavator is not only an eye-catcher, but also particularly practical for creating order on the desk.

Containers legs for use at loading bays – can hold up to 30 ton

20499 DKK Excl. VAT

With ConFoot shipping container legs, your container can be unloaded at the loading bay from or onto a trailer by just one person….. and without any use of crane or other unloading equipment.

Once the container has been secured to a loading bay and is standing on the ConFoot legs, a forklift can be driven straight on to load or unload goods. The maximum weight capacity which can be supported by the legs is 30 tons, supporting the vast majority of loads.

It’s user-friendy, cost effective and safe.

How it works
The container is raised by the air suspension chassis on a truck. At this point the ConFoot legs are fitted to the shipping container’s corner casting. When the chassis is then lowered, the legs will come into contact with the ground, shifting the weight of the container onto the legs. The truck can then drive away with it’s chassis and the container will be left standing free on the legs. The same process in reverse is used to load a container back onto the chassis. Check out the video on the right.

What type of chassis will this work on?
For ConFoot legs to function, they must be used in tandem with a truck chassis with functioning air suspension. The chassis must also be able to lower to the point where the corner casting of the loaded shipping container is between 1043 – 1448 mm above the ground. The vast majority of air suspension chassis can do this, but there are a few exceptions.

The set is comprised of two CFP legs at the front (door side) of the container and two original CF legs at the rear. The CF legs are placed at the rear in order to provide extra stability from their innovative magnetic clamp design. The CFP legs retain the same lightweight nature (only 24 kg) as the CF legs meaning that all four legs can be easily installed by just one person.

The altered design of the clamping mechanism means that the container doors can be folded fully back. Thus enabling a pocket to be easily fitted whilst the container is mounted on the set. It also allows the container to be left in tighter bays, as space for the doors either side of the container in is not required.

ConFoot sets have been tested with up to a maximum wind speed of 20 m/s, or 72 km/h.

The design of the ConFoot legs structure complies with the safety regulations decribed in the European 2006/42/EC Mavhinery Directive

Designed and tested in Finland.

Available on stock with direct delivery time 3-5 days to Europe.

Containers legs – can hold up to 34 ton

19499 DKK Excl. VAT

With ConFoot shipping container legs, your container can be unloaded from or onto a trailer by just one person….. and without any use of crane or other unloading equipment.

its user-friendy, cost effective and safe.

How it works
The container is raised by the air suspension chassis on a truck. At this point the ConFoot legs are fitted to the shipping container’s corner casting. When the chassis is then lowered, the legs will come into contact with the ground, shifting the weight of the container onto the legs. The truck can then drive away with it’s chassis and the container will be left standing free on the legs. The same process in reverse is used to load a container back onto the chassis. Check out the video on the right.

What type of chassis will this work on?
For ConFoot legs to function, they must be used in tandem with a truck chassis with functioning air suspension. The chassis must also be able to lower to the point where the corner casting of the loaded shipping container is between 1043 – 1448 mm above the ground. The vast majority of air suspension chassis can do this, but there are a few exceptions.

ConFoot sets have been tested with up to a maximum wind speed of 20 m/s, or 72 km/h.

The design of the ConFoot legs structure complies with the safety regulations decribed in the European 2006/42/EC Mavhinery Directive

Designed and tested in Finland.

Available on stock with direct delivery time 3-5 days to Europe.

Workbench, 2000 mm, Bott Verso+

Workbench, 2000 mm, Bott Verso+

3700 DKK Excl. VAT

Dette arbejdsbord fra Verso+ serien er robust bygget med en 40 mm bordplade i rødbøg.
Det har en god længde på 2000 mm, og en god dybde på 750 mm.
Bordet har en maks. bæreevne på 1000 kg.
Produkter fra bott sendes direkte fra produktion, og prisen er inklusiv levering.

Sale!

Stool, container

189 DKK 139 DKK Excl. VAT

The popularPhoto Stool now also comes with container motive!
Stable wood-based panels (MDF), equipped with high-resolution digital printing and UV-protective lacquer, are all the basis of this unique connector system creating a long-lasting seating furniture. By the way, it also looks good as a side table.