Earth Grounding Anker

HULK High quality impact steel smasher rods. They are available in a variety of combinations, including hand-held smasher rods, fixed length and expandable Power Smasher rods. Shaft options are available for most types of driven installation equipment. HULK Smasher Rods are available in different lengths from 0.9m to 3m and different diameters to achieve the desired installation depth.

Once the HULK Earth Anchor has been driven into the ground, it must be set in its “Anchor Locked” position. This is achieved by pulling on the anchor tendon with HULK Anchor Locking Equipment. The light anchor hook and the medium-sized anchor bushing are quick and easy methods for anchor locking of small to medium-sized HULK ground anchors.

PT-45 and PT-150 HULK anchor cabinets are important when installing HULK ground anchors in light to heavy installations for a specific load requirement. Both are designed for anchor lock and sample testing at the same time and can accommodate anchors installed vertically or at an angle to the ground. The anchor holding capacity is then easily read on the calibrated gauge. Various connections and brackets are available, which allow easy attachment to various HULK ground anchor tendons.

The H and HG series of HULK ground anchors cover a wide range from lightweight solutions to heavyweight solutions. Load capacities vary from 10 kN up to 200 kN.

Hulk H50, H80 and H110 based on an installation depth of 1.2 m cable with an 8 mm wire rope tendon. Hulk HG100 and HG180 based on an installation depth of 2.1 m, installed with a 22 mm Ø CTB anchor rod.

Predicted ultimate team capacity is based on the results of extensive testing and is offered as an application guide only.

Billede1

Users must take into account their individual, appropriate security factors.

Buy now:

500 DKK excl. VAT

Category: SKU: TWI25304

Earth Grounding Anker

Swipe to the right for more pictures

Buy now:

500 DKK excl. VAT

Category: SKU: TWI25304

HULK High quality impact steel smasher rods. They are available in a variety of combinations, including hand-held smasher rods, fixed length and expandable Power Smasher rods. Shaft options are available for most types of driven installation equipment. HULK Smasher Rods are available in different lengths from 0.9m to 3m and different diameters to achieve the desired installation depth.

Once the HULK Earth Anchor has been driven into the ground, it must be set in its “Anchor Locked” position. This is achieved by pulling on the anchor tendon with HULK Anchor Locking Equipment. The light anchor hook and the medium-sized anchor bushing are quick and easy methods for anchor locking of small to medium-sized HULK ground anchors.

PT-45 and PT-150 HULK anchor cabinets are important when installing HULK ground anchors in light to heavy installations for a specific load requirement. Both are designed for anchor lock and sample testing at the same time and can accommodate anchors installed vertically or at an angle to the ground. The anchor holding capacity is then easily read on the calibrated gauge. Various connections and brackets are available, which allow easy attachment to various HULK ground anchor tendons.

The H and HG series of HULK ground anchors cover a wide range from lightweight solutions to heavyweight solutions. Load capacities vary from 10 kN up to 200 kN.

Hulk H50, H80 and H110 based on an installation depth of 1.2 m cable with an 8 mm wire rope tendon. Hulk HG100 and HG180 based on an installation depth of 2.1 m, installed with a 22 mm Ø CTB anchor rod.

Predicted ultimate team capacity is based on the results of extensive testing and is offered as an application guide only.

Billede1

Users must take into account their individual, appropriate security factors.

Do you have any questions?

Martin J. Skov 

Lichtenbergsgade 3 B
8700 Horsens

Denmark
+45 22 66 46 38
info@SpecialContainer.dk

Do you have any questions?

Martin M. Skov

Bollervej 145
8700 Horsens

Denmark
+45 22 66 46 38
info@SpecialContainer.dk